Going Green with Upgrades

Lennox rebatesIf you’re considering home renovations and improvements this spring, pay attention to how newer, more advanced “green” appliances can reduce your energy use.  You’ll not only enjoy greater comfort, convenience and reliability from technologically-enhanced features, but you’ll also shell out less “green” from your wallet in energy costs.

Replacing aging refrigerators, dishwashers, freezers, washers, and dryers with more energy-efficient models is part of a sound strategy for controlling energy costs.  But, of course, your air conditioning and heating takes the biggest bite out of your energy funds – as much as half or more in some cases.

According to the Department of Energy, switching to high-efficiency air conditioners as part of your energy conservation efforts can help you reduce your energy use for cooling by 20-50%.  That’s a huge savings that adds up quickly.

Over the years, air conditioning technology has made great improvements.  If you compared one of today’s best models with an air conditioner made in the mid-1970s, you’d find that it uses 30-50% less energy to produce the same amount of cool air.  But even if your air conditioning system is just 10 years old, you could save 20-40% in cooling energy by replacing it with a newer model.

Remember – it’s not just the unit itself that saves energy.  You also need equipment that is properly sized for your home and professionally installed.  Units that are too large won’t adequately remove humidity.  Units that are too small won’t be able to maintain comfortable cooling on really hot days.  To talk about upgrading your air conditioning system, or other energy-saving options, give us a call at 402-362-5702.

Advertisements

7 Things to Know when Buing a New or Resale Home

Things are often not thought of until it’s too late…or they are learned through bad, uncomfortable and often expensive experiences.

1. Find out more about your home inspector first. General purpose home inspectors do not typically thoroughly inspect and test heating and cooling systems. This is due to their lack of knowledge, lack of testing equipment, and/or not getting paid enough to do an adequate job.

2. If you really want to know the condition of the house you’re planning on purchasing have a licensed contractor(s) inspect it for you. Hire a NATE certified heating & cooling contractor, a licensed electrician, plumber and/or other specialists. Be cautious when REALTORS suggest specific inspectors as there may be a conflict of interest involved.

3. Unless there is a lender requirement to do so THE SELLER SHOULD NEVER be the party to replace or add a heating and/or air conditioning system due to their condition. They buyer or new owner should be the one who adds to or replaces any significant part of the heating, cooling and/or indoor air quality system(s). Selecting a new or replacement system is not simple and should be selected by the family moving into the house. It’s the buyer’s family who will be living in the house after the seller moves out thus leaving any problems behind. The buyer should develop a relationship with a heating/cooling contractor as the buyer will need maintenance and service help during future years.

4. When owners/sellers sell their homes they very seldom educate the new owner regarding the heating/cooling systems. The sellers just want to get away leaving any problems and knowledge for the buyers to discover on their own. This is tragic! Buyers should insert language in their offer to purchase which requires the seller to educate the buyer regarding all heating/cooling, electrical and plumbing systems. This should include turning over all documentation which goes with the heating, cooling and hot water systems etc. A list of all contractors who have worked on these systems over the last five years would be provided. A certification that the proper building permits have been obtained for the replacement of any of these systems should be provided.

5. Note for Remodelers. When basements are finished there should be enough room left around the heating, cooling and water heater systems to permit easy access for maintenance. For example, by code, there must be at least 30 inches (more is better) of clear access in front of any furnace etc. Much additional space will be needed for the future additions of high efficiency air cleaners, humidifiers, zoning, heat recovery ventilators and/or another water heater etc. Stay away from homes with furnaces/heaters in crawl spaces or roof truss type attics because heating/cooling equipment in those spaces is usually very difficult or impossible to properly maintain. See the “NO-NO Locations for Mechanical Equipment” list.

6. After you move in don’t wait until you have a problem with your heating, cooling, hot water or electrical systems to call for help. If you have not already done so develop a relationship with reliable contractors BEFORE you need help. Have those contractors inspect and service your systems soon after you move in. Then they will be familiar with your systems so as to be able to give you outstanding service when needed. The worst way to have to find help is by looking in the yellow pages when you have an emergency.

7. Houses and their internal systems are much more complicated than they used to be. Therefore; all of the technicians working on these systems need to be better educated and smarter than ever. Look for experience and NATE certification in heating and air conditioning professionals to get competent service and help when you need it. AND expect to pay between $225.00 and $450.00 or more per hour for competent contractor help in your home. The average high quality home service call may be in the $500.00+ range in the Denver area.